Ideal to cut customize and and non standard gasket products. The machine can cut gasket and seal like silicon, asbestos, rubber and etc. In an addition , it helps to reduce the error rate caused by manual work.
TESTING EQUIPMENT & MACHINE FOR GASKETS FABRICATION
FIBER LASER METAL CUTTING MACHINE
Fiber laser metal cutting machine is popular in laser cutting type which adopts fiber laser source to fulfill perfect cutting effect. It is specifically in cutting of carbon steel, stainless steel gasket or even steel plates.
CNC LATHE MACHINE
CNC lathe machine fix the pre-processed object and rotate based on a fixed speed to ensure the positional accuracy of each processing surface and the outer circle, inner hole, end plane, groove and parts with same rotation axis.
Eyelet machine reinforce the hole and prevents it from stretching or to shield something from the sharp edges of the hole. Usually, we will offer customer different sizes and designs according to customer needs.
HYDRAULIC POWER PRESS GASKET CUTTER
Hydraulic power press gasket cutter mainly use for non-metal gaskets and compress objects with a ram. It cuts or punch, drill, straighten and mold anyway you need to transform or manipulate large pieces of gasket sheet into pieces.
KAMMPROFILE GASKET MACHINE
Kammprofile gasket machine make kammprofile gasket or strip in any sizes and in different profile shape. The grooving completely range of kammprofile shapes also can do inner ring angling and guide ring grooving.
LATHE TURNING MACHINE
Lathe turning machine rotates the workpiece about an axis of rotation to perform different operation and to create object with symmetry, remove unwanted parts of the material and leaving behind a nicely shaped workpiece.
LASER ENGRAVING MACHINE
Laser engraving machine is use for the process of incising, or etching a design onto a surface of spiral wound gasket by cutting or digging grooves into it. The marking is extremely resistant to external factors thanks to the depression in the material created.
POSITIVE MATERIAL IDENTIFICATION (PMI) TEST
PMI Test analyze the material and chemical composition of a metal or alloy at particular steps of alloy manufacturing or in-process alloy installation, ensures the accurate ratio of key elements and the material properties.
Milling machine is ideal for slotting, circular milling dividing and drilling, to produce flat surfaces in any orientation as well as surfaces of revolution, helical surfaces and contoured surfaces of various configurations.
RTJ HARDNESS TESTER MACHINE
To ensure and check the hardness of RTJ that meet the requirement as per API-Specification 6A and a minimum of 30 BHN softer than the flange, the rings will deform and affect a seal without damaging the RTJ grooves on the flanges.
The Mitutoyo ABSOLUTE digital caliper delivers accurate, repeatable outside dimension, inside dimension, depth and step measurements with accuracy and unrestricted speed.
SPIRAL WOUND GASKET WINDING MACHINE
Spiral wound gasket winding machine improve the productivity and ensure the good quality of the gasket. It is to deploy with automatic inner ring feeding system and can make both basic type and inner type of gasket fully automatically.
SPIRAL WOUND GASKET COMPRESSION TESTING MACHINE
Testing is required to ensure the nominal torque applied to the joint results in an effective seal. The compression tests spiral wound gaskets to meet the minimum requirements listed in the ASME B16.20 standards, for both standard and low stress gaskets